Steam distillation/drop-by-drop extraction with gas chromatography–mass spectrometry for fast determination of volatile components in jujube (Ziziphus jujuba Mill.) extract

pdf
Số trang Steam distillation/drop-by-drop extraction with gas chromatography–mass spectrometry for fast determination of volatile components in jujube (Ziziphus jujuba Mill.) extract 11 Cỡ tệp Steam distillation/drop-by-drop extraction with gas chromatography–mass spectrometry for fast determination of volatile components in jujube (Ziziphus jujuba Mill.) extract 1 MB Lượt tải Steam distillation/drop-by-drop extraction with gas chromatography–mass spectrometry for fast determination of volatile components in jujube (Ziziphus jujuba Mill.) extract 1 Lượt đọc Steam distillation/drop-by-drop extraction with gas chromatography–mass spectrometry for fast determination of volatile components in jujube (Ziziphus jujuba Mill.) extract 2
Đánh giá Steam distillation/drop-by-drop extraction with gas chromatography–mass spectrometry for fast determination of volatile components in jujube (Ziziphus jujuba Mill.) extract
4.6 ( 18 lượt)
Nhấn vào bên dưới để tải tài liệu
Đang xem trước 10 trên tổng 11 trang, để tải xuống xem đầy đủ hãy nhấn vào bên trên
Chủ đề liên quan

Nội dung

Sun et al. Chemistry Central Journal (2017) 11:101 DOI 10.1186/s13065-017-0329-6 RESEARCH ARTICLE Open Access Steam distillation/drop‑by‑drop extraction with gas chromatography–mass spectrometry for fast determination of volatile components in jujube (Ziziphus jujuba Mill.) extract Shi‑Hao Sun1,2, Guo‑Bi Chai2, Peng Li2, Jian‑Ping Xie2* and Yue Su1* Abstract Background: Jujube extract is commonly used as a food additive and flavoring. The unique jujube aroma and the mild sweet aroma of the extract are critical factors that determine product quality and affect consumer acceptability. The aroma changes with changes in the extraction condition, which is typically dependent on the characteristics of volatile oils in the extract. Despite their importance, the volatile oils of jujube extract have received less attention compared with the soluble components. So, an appropriate qualitative and quantitative method for determination of the volatile oils is vitally important for quality control of the product. Results: A method coupling steam distillation/drop-by-drop extraction with gas chromatography–mass spectrom‑ etry (S3DE/GC–MS) was developed to determine the volatile components of jujube extract. Steam distillation was coupled with solvent extraction; the resulting condensate containing volatile components from jujube extract was drop-by-drop extracted using 2 mL of methyl tertiary butyl ether. The solvent served two purposes. First, the solvent extracted the volatile components from the condensate. Second, the volatile components were pre-concentrated by drop-by-drop accumulation in the solvent. As a result, the extraction, separation, and concentration of analytes in the sample were simultaneously completed in one step. The main parameters affecting the S3DE procedure, such as the water steam bubbling rate, extraction solvent volume, sample weight and S3DE time, were optimized. The stand‑ ard addition approach was essential to obtain accurate measurements by minimizing matrix effects. Good linearity ­(R2 ≥ 0.9887) and good repeatability (RSDs ≤ 10.35%, n = 5) for 16 analytes in spiked standard analyte samples were achieved. Conclusions: With the S3DE/GC–MS method, seventy-six volatile compounds from jujube extract were identified and the content of 16 compounds was measured. The results were similar to those from simultaneous distillation extraction. The developed method was simple, fast, effective, sensitive, and provided an overall profile of the volatile components in jujube extract. Thus, this method can be used to determine the volatile components of extracts. Keywords: Steam distillation, Drop-by-drop extraction, Volatile components, GC–MS, Jujube (Ziziphus jujuba Mill.) extract *Correspondence: xiejp@ztri.com.cn; suyue@shutcm.edu.cn 1 Center for Chinese Medicine Therapy and Systems Biology, Shanghai University of Traditional Chinese Medicine, Shanghai 201203, Shanghai, China 2 Key Laboratory in Flavor & Fragrance Basic Research, Zhengzhou Tobacco Research Institute, China National Tobacco Corporation, Zhengzhou 450001, China © The Author(s) 2017. This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/ publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated. Sun et al. Chemistry Central Journal (2017) 11:101 Introduction Jujube (Ziziphus jujuba Mill.) is widely distributed in subtropical areas of the northern hemisphere, especially in China [1]. It has been commonly used in functional foodstuffs and crude drugs in traditional Chinese medicine [2, 3]. Jujube extract is usually used as a food additive or flavoring and is listed in the “lists of food additives” in China [4]. Jujube extract is a reddish-brown, semi-liquid substance obtained by extracting jujube fruits using different concentration of ethanol in water. The unique jujube aroma and the mild sweet aroma of the extract are critical factors that determine product quality and affect consumer acceptability [5]. The aroma changes with changes in the extraction condition, which is typically dependent on the characteristics of volatile oils in the extract. Despite their importance, the volatile oils of jujube extract have received less attention compared with the soluble components [6–8]. Gas chromatography–mass spectrometry (GC–MS) is typically employed to analyze volatile components in flavorings. Prior to GC–MS analysis, volatile components were isolated from nonvolatile mixtures, which required sample preparation steps to transfer the analyte into a pre-purified and concentrated form compatible with the analytical system [9]. Commonly used methods for isolating volatile components from natural sources include thermal desorption or vapor collection by cryogenic concentration or by adsorption on solid adsorbents, direct solvent extraction (e.g., Soxhlet and liquid–liquid extraction) [10, 11]. Thermal desorption and vapor collection are unreproducible and prone to artifacts, especially when working in the ppm range [12]. The advantages of direct solvent extraction are that most volatile compounds (low, medium, and high volatility) can be separated in one step, and good analytical precision can be achieved. However, direct extraction with a solvent co-solubilizes non-volatile components, which may contaminate the injectors and limit the analyte concentration [13]. Furthermore, large volumes of organic solvent, long extraction times, and concentration steps are required. Finally, compounds with low boiling points may be entirely missing in the solvent evaporation step. In recent years, simple, rapid techniques that are solvent-free or require only small amounts of solvent, such as supercritical fluid extraction [14], headspace solidphase microextraction [15–17], headspace liquid-phase microextraction (HS-LPME) [18, 19], and stir-bar sorptive extraction [20], have been widely used to characterize the volatile components of complex matrices. Page 2 of 11 However, these methods often had poor precision. Recently, a method coupling hydro-distillation with static HS-LPME was developed and applied to determine the essential oil components of a natural material; this was a fast, low-cost, facile and efficient method [9, 21]. Despite a poor repeatability, e.g., between 17 and 19% for main components and even worse for minor components, this HS-LPME method provides a good basis for developing a more effective method. Steam distillation is a popular approach to obtain volatile oils from natural materials. However, it has rarely been employed for the analysis of volatile oils in natural extracts. Small sample amounts are often used in analytical experiments, resulting in fractions of volatile oils too low to be effectively separated. In 1964, Likens et al. [22] introduced simultaneous distillation extraction (SDE) by combining steam distillation and extraction. However, extracts obtained by SDE must be concentrated to reach the minimal sensitivity required for GC. Godefroot et al. [12] further improved SDE to enable determination following 2 h extractions using a microapparatus and without requiring any concentration steps before gas chromatography. In 1983, Bicchi et al. [23] made improvements to the microapparatus to decrease the volume of solvent used to 100 μL and to avoid hot organic solvent reflux. Bicchi et al. also standardized the operating conditions of the apparatus. More recently, Wei et al. [24] improved the microapparatus by simplifying the operating conditions and isolating volatile oils in natural materials. However, volatile components with low boiling points may be lost. Although the microapparatus is commercially available and has been used for extracting volatile components from natural materials, few practical applications have been reported for accurate quantitative analyses. Currently, methods that couple SDE with concentration steps are popular approaches for analyzing volatile components isolated from matrices. However, long extraction times (> 2 h) and large volumes of organic solvents (> 50 mL) are required [25–27]. Similar to direct solvent extraction, the concentration step after SDE may exclude compounds with low boiling points. This work presents a new sample preparation method, steam distillation/drop-by-drop extraction (S3DE), to effectively extract, separate, and pre-concentrate volatile constituents in extracts. We also developed an easy-touse approach to isolate and quantitatively analyze volatile components in jujube extracts with minimal solvent volumes at room temperature in a reasonable time. A comparison study with SDE was also carried out to benchmark the performance of the new approach. Sun et al. Chemistry Central Journal (2017) 11:101 Experimental Material and reagents Jujube extract was purchased from Zhengzhou Jieshi chemical company, China. The extract was produced by the following procedure. The jujube (Ziziphus jujuba Mill.) fruit was cleaned and denucleated. The pitted jujubes were then crumbed and extracted using 65% alcohol for 2 h at 70 °C. Then, the solvent was removed to produce the jujube extract. Butanol, 3-methyl-1-butanol, 1-hexanol, 1-pentanol, 1-heptanol, 1-octanol, 1-nonanol, acetic acid, isobutyric acid, butyric acid, pentanoic acid, heptanoic acid, octanoic acid, capric acid, undecanoic acid, dodecanoic acid, 2-ethyl hexanol, furfural, 2-acetylfuran, benzaldehyde, 5-methylfurfural, 2-furanmethanol, dl-menthol, phenethyl alcohol, damascenone; ethyl hexanoate, ethyl heptanoate, ethyl caprylate, ethyl nonanoate, methyl caprate, ethyl caprate, diethyl succinate, methyl phenylacetate, ethyl phenylacetate, methyl laurate, phenethyl acetate, ethyl laurate, ethyl 3-phenylpropionate, methyl tetradecanoate, ethyl tetradecanoate, ethyl pentadecanoate, methyl hexadecanoate, ethyl hexadecanoate, ethyl heptadecanoate, ethyl stearate, ethyl oleate, ethyl linoleate, and styralyl propionate (as an internal standard) were Page 3 of 11 purchased from J&K Scientific Ltd. Dichloromethane (chromatography grade) and methyl tertiary butyl ether (MTBE; chromatography grade) was provided by CNW technologies GmbH. A mixed standard solution was prepared by resolving the chemicals in MTBE, including 3-methyl-1-butanol (3.53 mg/mL), 1-hexanol (0.29 mg/mL), furfural (0.63 mg/mL), ethyl caprate (0.38 mg/mL), menthol (0.26 mg/mL), 2-furanmethanol (0.26 mg/mL), ethyl phenylacetate (0.55 mg/mL), ethyl laurate (2.86 mg/ mL), ethyl 3-phenylpropionate (0.25 mg/mL), phenylethyl alcohol (1.04 mg/mL), heptanoic acid (0.19 mg/mL), ethyl myristate (0.97 mg/mL), octanoic acid (0.32 mg/ mL), ethyl hexadecanoate (2.21 mg/mL), decanoic acid (2.05 mg/mL), dodecanoic acid (12.71 mg/mL), ethyl oleate (0.91 mg/mL), and ethyl linoleate (0.23 mg/mL). An internal standard solution (3.58 mg/mL) was prepared by resolving styralyl propionate in MTBE. Instrumentation and steam distillation/drop‑by‑drop extraction procedure A diagram of the S3DE apparatus is shown in Fig. 1. The apparatus primarily consists of a three-necked, roundbottom flask, a condenser, and a collection bottle. The Fig. 1 The diagram of steam distillation/drop-by-drop extraction device. (The device is suitable for extraction of volatile oils from extract. e.g. The jujube extract is produced by the following procedure: The jujube fruit was cleaned and denucleated. The pitted jujubes were then crumbed and extracted using alcohol. Then, the solvent was removed to produce the jujube extract) Sun et al. Chemistry Central Journal (2017) 11:101 S3DE procedure was as follows. First, the apparatus was assembled following the diagram shown in Fig. 1. Then, the condenser was switched to forced water circulation, which was cooled to 2–3 °C by a refrigeration system. After passing condensate water continuously through the condenser, a 3 g mixture of jujube extract and 20 mL of water were added into the three-necked, round-bottom flask. The water vapor exit was submerged in the mixture. Then, 2 mL of MTBE were spiked into the collection bottle, which was immersed into an ice-salt bath. A safety valve was closed, and water steam generated by a precise steam generator (flow > 10 g/min, 100–400 °C, approximately 0.5 MPa pressure; Suzhou Aros environment generator Co., Ltd.) was bubbled into the mixture. The vapor containing the volatile constituent of jujube extract flowed over into the condenser and was condensed as a liquid. This liquid was collected drop by drop into the collection bottle and was extracted by MTBE. The safety valve was opened, and the bottom bottle was removed after a determined extraction time. This MTBE solution was directly analyzed by GC–MS. A quantitative comparison experiment was performed using SDE/GC–MS. SDE was conducted as described by Wang et al. [5]. Jujube extract (3 g) and 250 mL distilled water were mixed in a 1000-mL flask, and 60 mL dichloromethane was used as extraction solvent in a 100-mL flask. The two flasks were maintained at 120 and 60 °C by an electric jacket and a water bath, respectively. Each extraction was carried out for 3 h after the two arms started to reflux. After extraction, the dichloromethane extract was dried over anhydrous sodium sulfate overnight, concentrated to 2 mL and filtered through a 0.45μm micropore film prior to GC–MS analysis. Gas chromatography/mass spectrometry GC–MS analysis was performed using an Agilent 7890A gas chromatograph equipped with a DB-WAXetr capillary column (60 m × 0.25 mm, 0.25-μm coating thickness) and an Agilent 5975C mass detector. The analysis conditions were as follows: injector and transfer line temperature 250 and 280 °C, respectively; oven temperature increased from 50 °C (for 1 min) to 240 °C at 5 °C/min and was held at 240 °C for 10 min; helium carrier gas at 1 mL/min; 1 μL injection volume; and splitless. All samples for qualitative analyses were analyzed in full scan mode with a mass range of 33–500 amu. Selected ion monitoring (SIM) mode was used for quantitative analyses, the confirmative ions and the quantitative ions of the compounds are shown in Table 1. Identification of volatile components in jujube extract The volatile components in jujube extract were identified using the NIST11 and Wiley databases and retention Page 4 of 11 indices. Linear retention indices were obtained using gas chromatograms by interpolation between bracketing n-alkanes [28–30]. A homologous series of n-alkanes (C-7 to C-40; ULTRA Scientific, Inc.; North Kingstown, USA) was used as a standard. A few targets were further confirmed using standard compounds. Quantitative analysis of volatile components in the jujube extract The quantitative analyses of volatile components in the jujube extract were performed using the standard addition approach. All data presented in this paper are averages of five replicates unless otherwise stated. Calibration curves were constructed by determining the peak area ratio of analytes-to-internal standard (Y) versus the amount of spiked standard analytes (X). Method precision was evaluated using relative standard deviation (RSD), and recovery rates were measured following the procedure of Wu et al. [18, 31]. Analyte recovery (five replicate tests) was calculated as (mean calculated amount/nominal amount) × 100%. Results and discussion Steam distillation/drop‑by‑drop extraction and GC–MS analysis Steam distillation is a good method to obtain volatile oils from large amounts of plant materials. When vapor-capturing volatile oils are sufficiently cooled, the oil naturally separates from the hydrosol [9]. A small amount of the oil is often used for instrument analysis. However, the obtained volatile oils are typically at trace levels too difficult to effectively separate. In this study, volatile components in jujube extract were extracted by the device shown in Fig. 1. This S3DE extraction process is based on the basic principles of steam distillation and extraction. As water steam is continuously bubbled into a jujube extract solution in the three-necked, round-bottom flask, the vapor captures the volatile components of the jujube extract. The vapor is then transferred under pressure and cooled in the condenser. As the vapor cools, liquid condensate drops, containing the volatile components, are formed and collected in a collection bottle. (The drop formation rate of the liquid condensate can be controlled by modifying the water steam bubbling rate). When an organic solvent less dense than water is present in the collection bottle, the condensate drop can naturally pass through the solvent layer and gather at the bottom of the collection bottle. The volatile components in the drops are extracted into the organic solvent as the drop passes through the organic layer. Thus, the volatile components of the jujube extract can be extracted into the organic phase. Sun et al. Chemistry Central Journal (2017) 11:101 Page 5 of 11 Table 1 Retention time, linear retention index, area normalization percent content of the volatile components in jujube extract identified by the S3DE/GC–MS and confirmative ion and quantitative ion of the selected compound for quantitative analysis No. RT Compounds Area normalization percent content (%) Identification method LRI Confirmative ion Quantitative ion 1 9.887 2-Methyl-1-propanol 3.17 MS – – – 2 11.148 1-Butanol 0.25 RI, MS, ST 1144 – – 3 12.792 3-Methyl-1-butanol 8.45 RI, MS, ST 1207 70, 55 55 4 13.748 Ethyl capronate 0.07 RI, MS, ST 1243 – – 5 13.987 1-Pentanol 0.14 RI, MS, ST 1252 – – 6 15.818 4-Methyl-2-hexanol 0.04 RI, MS 1321 – – 7 16.372 Ethyl heptanoate 0.06 RI, MS, ST 1341 – – 8 16.705 1-Hexanol 0.54 RI, MS, ST 1354 84, 69 69 9 17.204 1,2-Dimethyl-cyclopent-2-ene‑ carboxylic acid 0.12 RI, MS 1372 – – 10 19.046 Ethyl caprylate 0.07 RI, MS, ST 1443 – – 11 19.371 1-Heptanol 0.28 RI, MS, ST 1455 – – 12 19.452 Acetic acid 0.13 RI, MS, ST 1458 – – 13 20.087 Furfural 0.55 RI, MS, ST 1483 96, 95 96 14 20.305 2-Ethyl-1-hexanol 0.08 RI, MS, ST 1491 – – 15 20.409 Ethyl 7-octenoate 0.06 RI, MS 1495 – – 16 21.169 1-(2-Furanyl)-ethanone 0.13 RI, MS, ST 1526 – – 17 21.527 Ethyl nonanoate 0.02 RI, MS, ST 1540 – – 18 21.648 Propanoic acid 0.06 RI, MS 1545 – – 19 21.849 Benzaldehyde 0.12 RI, MS, ST 1553 – – 20 22.022 1-Octanol 0.22 RI, MS, ST 1560 – – 21 22.367 2-Methyl-propanoic acid 0.05 RI, MS, ST 1574 – – 22 22.917 5-Methyl-2-furan-carboxalde‑ hyde 0.17 RI, MS, ST 1596 – – 23 23.021 Hexadecane 0.02 RI, MS, ST 1600 – – 24 23.125 Methyl caprate 0.05 RI, MS, ST 1604 – – 25 23.845 Butanoic acid 0.06 RI, MS, ST 1635 – – 26 24.124 Ethyl caprate 0.39 RI, MS, ST 1646 155, 101 101 27 24.239 Menthol 0.40 RI, MS, ST 1651 138, 128 128 28 24.359 1-Nonanol 0.08 RI, MS, ST 1656 – – 29 24.676 2-Furanmethanol 0.30 RI, MS, ST 1670 98, 81 98 30 25.121 Diethyl succinate 0.02 RI, MS, ST 1688 – – 31 26.082 5-Methyl-2-Furanmethanol 0.04 RI, MS 1730 – – 32 26.394 Pentanoic acid 0.10 RI, MS, ST 1744 – – 33 26.859 1,2-Dimethyl-4-oxocyclohex2-enecarboxaldehyde 0.03 RI, MS 1765 – – 34 26.921 1-Decanol 0.02 RI, MS 1767 – – 35 27.153 Naphthalene 0.02 RI, MS 1778 – – 36 27.248 Methyl phenylacetate 0.07 RI, MS, ST 1782 – – 37 27.808 Ethyl phenylacetate 0.39 RI, MS, ST 1807 164, 91 91 38 27.901 Methyl laurate 0.24 RI, MS, ST 1811 – – 39 28.505 Phenethyl acetate 0.40 RI, MS, ST 1839 – – 40 28.672 Damascenone 0.14 RI, MS, ST 1847 – – 41 28.765 Ethyl laurate 4.03 RI, MS, ST 1851 183, 101 101 42 29.639 1-Methyl-naphthalene 0.09 RI, MS 1891 – – 43 30.003 Ethyl 3-phenylpropionate 0.33 RI, MS, ST 1909 178, 104 104 44 30.493 Phenylethyl alcohol 0.71 RI, MS, ST 1932 122, 91 91 45 30.919 5-Butyldihydro-2(3H)-furanone 0.08 RI, MS 1953 – – Sun et al. Chemistry Central Journal (2017) 11:101 Page 6 of 11 Table 1 continued No. RT Compounds 46 31.013 Heptanoic acid 47 31.2 Isobutyl laurate 48 32.001 49 50 Area normalization percent content (%) Identification method LRI Confirmative ion Quantitative ion 0.38 RI, MS, ST 1958 87, 73 73 0.08 RI, MS 1967 – – 4-hydroxy-4-methyl-4H-naph‑ thalen-1-one 0.15 RI, MS 2006 – – 32.251 Methyl myristate 0.05 RI, MS, ST 2019 – – 33.000 Ethyl myristate 2.68 RI, MS, ST 2057 101, 88 88 51 33.156 Octanoic acid 0.79 RI, MS, ST 2065 73, 60 73 52 33.364 Isoamyl laurate 0.06 RI, MS 2075 – – 53 33.666 Ethyl tetradecenoate (I) 0.09 RI, MS 2090 – – 54 33.791 Ethyl tetradecenoate (II) 2.43 RI, MS 2097 – – 55 33.947 Ethyl tetradecenoate (III) 0.02 RI, MS 2105 – – 56 34.54 6,10,14-Trimethyl-2-pentade‑ canone 0.19 RI, MS 2136 – – 57 34.967 Ethyl pentadecanoate 0.13 RI, MS, ST 2159 – – 58 35.217 Nonanoic acid 0.25 RI, MS, ST 2172 – – 59 36.216 Methyl hexadecanoate 0.27 RI, MS, ST 2226 – – 60 36.882 Ethyl hexadecanoate 6.32 RI, MS, ST 2263 101, 73 101 61 37.006 Methyl (Z)-9-hexadecenoate 0.12 RI, MS 2270 – – 62 37.131 Decanoic acid 5.08 RI, MS, ST 2276 129, 73 73 63 37.412 Ethyl hexadecenoate (I) 3.50 RI, MS 2292 – – 64 37.652 Ethyl hexadecenoate (II) 0.13 RI, MS 2305 – – 65 37.724 Ethyl hexadecenoate (III) 5.06 RI, MS 2309 – – 66 38.13 Dimethyl phthalate 0.25 RI, MS 2333 – – 67 38.682 Ethyl heptadecanoate 0.07 RI, MS, ST 2364 – – 68 39.054 Undecanoic acid 0.17 RI, MS, ST 2386 – – 69 40.524 Ethyl octadecanoate 0.23 RI, MS, ST 2466 – – 70 40.94 Dodecanoic acid 27.04 RI, MS, ST 2489 200, 171 200 71 41.398 Ethyl oleate 0.30 RI, MS, ST 2512 264, 222 264 72 41.98 Ethyl linoleate 0.35 RI, MS, ST 2540 109, 95 109 73 42.542 Isobutyl phthalate 2.90 RI, MS 2566 – – 74 45.716 Tetradecanoic acid 7.64 RI, MS 2698 – – 75 46.382 Dibutyl phthalate 2.91 RI, MS 2721 – – 76 47.173 Z-7-Tetradecenoic acid 7.57 RI, MS 2747 – – The extraction solvent should be carefully selected to achieve the desired extraction. In this study, MTBE, an organic solvent with a density less than that of water, was used as the extraction solvent and spiked into the collection bottle to extract the condensate without optimization. Volatile oils naturally separate from hydrosols. As the water steam vapor is condensed, the volatile oils continuously separate from the hydrosol. As a result, the volatile oils are present on the surfaces of the forming drops. When the drops enter the organic solvent layer in the collection bottle, the surface-dwelling volatile oils are desorbed into the organic solvent while the water phase drops pass through the solvent layer. As these aqueous drops are collected in the collection bottle, the volatile oils are concentrated in the organic solvent. This organic solvent phase can then be directly analyzed by GC–MS, as is shown in the chromatogram in Fig. 2a. The volatile components in the jujube extract were identified using the NIST11 and Wiley databases and the retention indices. Other analytes were also confirmed using standard compounds. The results are summarized in Table 1. Parameter optimization of S3DE Various volatile components with different boiling points, including 3-methyl-1-butanol, 1-heptanol, ethyl caprate, ethyl laurate, ethyl hexadecanoate, and Sun et al. Chemistry Central Journal (2017) 11:101 Page 7 of 11 Fig. 2 The GC/MS chromatogram of volatile components in jujube extract. The samples of a and b were prepared by S3DE and SDE, respectively dodecanoic acid, are present in jujube extract and were selected as targets to optimize the extraction parameters, such as the water steam bubbling rate, MTBE volume, sample weight and S3DE time. After the extraction was completed, the MTBE solution containing the analytes was directly injected into the GC/MS system for analysis. All quantifications were based on the relative peak area of the analytes to the internal standards unless otherwise stated. Bubbling rate of water steam The water steam bubbling rate is a key factor that affects the efficiency of steam-distillation. A higher bubbling rate typically provides better distillation efficiency. However, if the bubbling rate is too high, the vapor with volatile components would not be completely cooled by the condenser. Furthermore, the condensate would be generated so fast it would be impossible to achieve a drop-bydrop extraction procedure. In this study, we modified the water steam bubbling rate using a control valve to adjust the condenser efficiency. As a result, the condensates Fig. 3 Optimization of the extraction solvent volume were drop-by-drop collected into the collection bottle at a rate of 2 drops/1 s. Volume of MTBE Preliminary experiments were performed to optimize the volume of MTBE. The results (Fig. 3) indicated that the relative peak area of the analytes-to-internal standard did not significantly change, whereas the absolute peak area of the analytes decreased with increasing MTBE volume within a set S3DE time. Thus, smaller volumes of MTBE should be used. In practice, the solvent volume typically decreases with increasing S3DE time due to solvent volatility. For convenience-sake, a 2-mL volume of solvent, ideal for GC–MS automatic injection, was used in the S3DE experiments. After S3DE, 1 mL of the MTBE solvent with volatile components was further analyzed using GC–MS. Weight of sample A number of studies have confirmed that the weight of the sample is dependent on the requirements of the Sun et al. Chemistry Central Journal (2017) 11:101 analytical instrument. Preliminary experiments showed that the absolute peak area of the selected analytes increased with increasing sample weight. To explore the influence of sample weight on the extraction efficiency of the volatile components in jujube extract, the sample weight was optimized over a 1–10 g range (data not shown). When 1 g of jujube extract was used, a long S3DE time was required to extract sufficient amounts of low content volatile compounds to meet GC–MS minimum detection limit requirements. However, for high content volatile compounds, a prolonged S3DE would result in over-extraction, which may overload the chromatographic column. As a compromise, 3 g sample weights were used. S3DE time In general, the amount of volatile components extracted from sample increases with steam-distillation time. During S3DE, solvent extraction was performed following steam-distillation. Experimental results showed that the drop-by-drop extraction and steam-distillation were nearly simultaneous after the first drop of condensate formed in the condenser. Thus, the efficiency of solvent extraction and steam-distillation is primarily dependent on the steam-distillation time, or “S3DE time”. The S3DE time is defined as the time from the formation of the first drop of condensate in the condenser to the time at which the collection bottle is removed. A series of experiments were performed to optimize the S3DE time (i.e., 2, 4, 6, 8, and 10 min), as shown in Fig. 4. The amount of analytes extracted by S3DE was dependent on the S3DE time. The GC–MS data showed that the absolute peak area of all analytes increased with increasing S3DE time. The results also showed that the relative peak area of the analytes-to-internal standard was roughly constant when the S3DE time was at least Fig. 4 Optimization of the S3DE time Page 8 of 11 8 min. Thus, 8 min was selected as the S3DE time for further experiments. Validation of S3DE‑GC/MS method An analytical method should not be influenced by the sample matrix. A blank matrix is always desired for all types of quantitative analyses. However, a blank matrix is usually not available, especially for natural samples. The standard addition approach may be a good alternative way to quantitatively analyze a sample and can compensate for differences in sample matrices [18, 32–35]. This approach makes use of the addition of known amounts of analytes of interest to multiple aliquots of the sample and of another non-spiked, baseline aliquot, i.e., the “zeropoint”. Then, after the samples are analyzed, a calibration curve of the measured values is plotted against the spiked amounts for each sample aliquot. A straight line is drawn and the value of the X intercept represents the amount of analyte in the unknown sample [18, 31, 36, 37]. In this study, 18 volatile compounds in the extract were selected to validate the S3DE-GC/MS method. An ion monitor was employed for the mass spectrometry analysis of the analytes to identify and measure the level of ions as summarized in Table 1. A series of amounts (0, 20, 40, 60, and 120 μL) of standard solution were spiked into the three-necked, round-bottom flask containing 3 g jujube extract with an internal standard. The samples were then analyzed by the developed method. The calibration curve of each target analyte was constructed and is shown in Table 2. A few performance parameters, including linearity, limits of detection (LODs), repeatability and recovery, were investigated using samples with unknown levels of volatile components. A linear response was observed for the added standard stock solutions from 0 to 120 μL with a high coefficient of determination (­R2 ≥ 0.9821), Sun et al. Chemistry Central Journal (2017) 11:101 Page 9 of 11 excluding furfural ­ (R2 = 0.7084), 2-furanmethanol 2 ­(R = 0.8051) and heptanoic acid (­R2 = 0.9087). The relative standard deviation (RSD) was less than 13.97% and is shown in Table 3. Good LODs ranging from 0.11–4.15 μg/g were obtained, as based on three times the standard deviations from ten replicate tests at the “zero-point”. The recoveries of analytes were measured by spiking 20 μL of standard stock solution into the jujube extract sample, which was then analyzed as an unknown level sample. The results (shown in Table 2) were satisfactory except for furfural (74.19%, RSD = 27.44%, n = 5), 2-furanmethanol (79.22%,RSD = 19.03%, n = 5) and heptanoic acid (87.06%, RSD = 11.06%, n = 5). These excluded compounds had low recovery levels and poor linearity. These compounds likely had relatively large water solubility levels. the data collected by the S3DE method and the SDE method were performed using Microsoft Office Excel. The results indicated that there were no significant differences (P = 0.49) between the yields of the sixteen components as determined by the two methods. However, a significant difference (P = 0.01) was observed regarding repeatability. Although a better repeatability was obtained by the SDE method, the developed S3DE method required lower amounts of organic solvent and was a simpler, more rapid, and more accurate procedure for characterizing the volatile components in jujube extract. A review of our experimental procedure and a rigorous standardization of the operating conditions may be helpful to improve the repeatability of the S3DE method, which will be further investigated. Conclusions A simple sample preparation procedure was developed to characterize the volatile components in jujube extract. In this procedure, condensates from steam-distillation were drop-by-drop extracted in a small volume of organic solvent. The extraction procedure was performed immediately after steam-distillation. As a result, the extraction, separation, and pre-concentration of analytes in the sample were simultaneously completed. This minimal-solvent approach proved to be a simple, rapid, and accurate procedure for the determination of volatile components in jujube extract. Good linearity (­R2 ≥ 0.9887) and good Quantitative analysis of volatile components in jujube extract A jujube extract sample with unknown levels of volatile components was analyzed using the developed method. The levels of the volatile components in the sample were obtained by determining the X-intercept as shown in Table 3. The sample was also measured using a conventional SDE/GC–MS method. The chromatogram is shown in Fig. 2b, and the data relative to repeatability of the method (see Additional file 1 for more detail) are deposited in Table 3. Paired t test comparisons between Table 2 Calibration curves of 18 target analytes Name Calibration curves R2 LOD (μg/g) Recovery Value (%) 3-Methyl-1-butanol 1-Hexanol Furfural Ethyl caprate Menthol 2-Furanmethanol Ethyl phenylacetate Ethyl laurate Ethyl 3-phenylpropionate Phenylethyl alcohol Heptanoic acid Ethyl myristate Octanoic acid Ethyl hexadecanoate Decanoic acid Dodecanoic acid Ethyl oleate Ethyl linoleate Y = 0.0089X + 0.8730 Y = 0.0039X + 0.01150 Y = 0.0062X + 0.0463 Y = 0.0066X + 0.0398 Y = 0.0035X + 0.0239 Y = 0.0016X + 0.0104 Y = 0.0300X + 0.2147 Y = 0.0085X + 0.4157 Y = 0.0168X + 0.0494 Y = 0.0075X + 0.1132 Y = 0.0029X + 0.0201 Y = 0.0218X + 0.6532 Y = 0.0024X + 0.0278 Y = 0.0143X + 0.9181 Y = 0.0096X + 0.4570 Y = 0.0913X + 30.027 Y = 0.0028X + 0.0390 Y = 0.0026X + 0.0183 RSD(%) 0.9987 3.16 91.33 0.9931 0.15 95.62 10.10 9.81 0.7099 0.97 74.19 27.44 0.9990 1.02 103.68 8.24 0.9939 0.61 97.38 8.35 19.03 0.8042 1.16 79.22 0.9991 0.11 96.33 5.41 0.9962 1.86 99.21 5.87 0.9992 0.41 98.45 8.25 0.9993 1.03 97.61 6.15 11.06 0.9887 1.15 87.06 0.9971 2.67 97.99 3.52 0.9895 1.65 90.16 9.17 0.9979 3.41 100.04 5.28 0.9894 3.94 93.54 8.66 0.9981 4.15 95.59 7.94 0.9990 0.84 94.80 8.36 0.9980 0.75 92.34 10.95 Sun et al. Chemistry Central Journal (2017) 11:101 Page 10 of 11 Table 3 Concentrations of volatile compound in jujube extract obtained by the S3DE method and the SDE method Name Concentration (μg/g) S3DE method Value 3-Methyl-1-Butanol 1-Hexanol SDE method Repeatability (RSD, %) Value Repeatability (RSD, %) 32.70 4.72 28.92 5.11 0.98 6.18 0.68 3.07 Ethyl caprate 2.01 5.11 1.67 2.25 Menthol 2.27 5.79 1.91 4.96 Ethyl phenylacetate Ethyl laurate 2.38 6.13 16.3 4.83 2.08 16.3 5.17 4.13 Ethyl 3-phenylpropionate 0.98 5.91 0.81 2.39 Phenylethyl alcohol 5.10 4.25 4.59 4.23 Heptanoic acid 2.31 10.35 2.36 6.41 Ethyl myristate 9.99 4.81 10.37 3.17 Octanoic acid Ethyl hexadecanoate Decanoic acid Dodecanoic acid 3.86 6.87 3.66 5.68 21.40 4.64 19.09 4.19 15.87 5.54 16.96 5.73 109.62 4.17 113.52 4.36 Ethyl oleate 4.64 6.24 5.77 5.27 Ethyl linoleate 2.35 6.31 1.75 6.48 repeatability (RSDs ≤ 6.87%, n = 5) were achieved for 16 analytes in a spiked standard sample, excluding heptanoic acid (RSD = 10.35%). This new approach can be used as an alternative in the analysis of volatile fractions in extracts and complex matrices and provides certain advantages, including simple operation and lower time, energy and organic solvent requirements. Additional file Additional file 1. Data about the performance of the SDE method. Authors’ contributions SS performed chemical analysis and data analysis, and drafted the manuscript. CG and LP participated in chemical analysis. JX and YS co-participated in the experimental design of the study, provided expert scientific advice and revised the manuscript. All authors read and approved the final manuscript. Acknowledgements The authors thank for financial support from the National Nature Science Foundation of China (No. 21572134) and the major project of CNTC [No. 110201301026 (BR = 01)]. Thanks for the helps of Lin Fang-Qing. Competing interests The authors declare that they have no competing interests. Publisher’s Note Springer Nature remains neutral with regard to jurisdictional claims in pub‑ lished maps and institutional affiliations. Received: 21 January 2017 Accepted: 22 September 2017 References 1. Zhang H, Jiang L, Ye S, Ye YB, Ren FZ (2010) Systematic evaluation of anti‑ oxidant capacities of the ethanolic extract of different tissues of jujube (Ziziphus jujuba Mill.) from China. Food Chem Toxicol 48:1461–1465 2. Plastina P, Bonofiglio D, Vizza D, Fazio A, Rovito D, Giordano C, Barone I, Catalano S, Gabriele B (2012) Identification of bioactive constituents of Ziziphus jujube fruit extracts exerting antiproliferative and apoptotic effects in human breast cancer cells. J Ethnopharmacol 140:325–332 3. Kubota H, Morii R, Kojima-Yuasa A, Huang X, Yano Y, Matsui-Yuasa I (2009) Effect of Zizyphus jujuba extract on the inhibition of adipogenesis in 3T3L1 preadipocytes. Am J Chin Med 37:597–608 4. National health and family planning commission of the people’s Republic of China (2015) GB 2760-2014 food safety national standards for the usage of food additives. China Food Safety Regulations, The People’s Republic of China, Beijing 5. Wang H, Li P, Sun S-H, Zhang Q-D, Su Y, Zong Y-L, Xie J-P (2014) Com‑ parison of liquid–liquid extraction, simultaneous distillation extraction, ultrasound-assisted solvent extraction, and headspace solid-phase microextraction for the determination of volatile compounds in jujube extract by gas chromatography/mass spectrometry. Anal Lett 47:654–674 6. Zhao J, Li SP, Yang FQ, Li P, Wang YT (2006) Simultaneous determination of saponins and fatty acids in Ziziphus jujuba (Suanzaoren) by high perfor‑ mance liquid chromatography-evaporative light scattering detection and pressurized liquid extraction. J Chromatogr A 1108:188–194 7. Guo S, Duan JA, Tang YP, Qian YF, Zhao JL, Qian DW, Su SL, Shang EX (2011) Simultaneous qualitative and quantitative analysis of triterpenic acids, saponins and flavonoids in the leaves of two Ziziphus species by HPLC–PDA–MS/ELSD. J Pharm Biomed Anal 56:264–270 8. Huang YL, Yen GC, Sheu F, Chau CF (2008) Effects of water-soluble carbo‑ hydrate concentrate from chinese jujube on different intestinal and fecal indices. J Agric Food Chem 56:1734–1739 9. Heravi MJ, Sereshti H (2007) Determination of essential oil components of Artemisia haussknechtii Boiss. using simultaneous hydrodistillation-static headspace liquid phase microextraction-gas chromatography mass spec‑ trometry. J Chromatogr A 1160:81–89 10. Sánchez-Palomoa E, Alañón ME, Díaz-Maroto MC, González-Viñasa MA, Pérez-Coelloet MS (2009) Comparison of extraction methods for volatile compounds of Muscat grape juice. Talanta 79:871–876
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.