Power-over-Ethernet Solutions

pdf
Số trang Power-over-Ethernet Solutions 6 Cỡ tệp Power-over-Ethernet Solutions 254 KB Lượt tải Power-over-Ethernet Solutions 0 Lượt đọc Power-over-Ethernet Solutions 0
Đánh giá Power-over-Ethernet Solutions
4.6 ( 8 lượt)
Nhấn vào bên dưới để tải tài liệu
Để tải xuống xem đầy đủ hãy nhấn vào bên trên
Chủ đề liên quan

Nội dung

Four-Port Midspan Power-over-Ethernet Unit.................... 43 • 3/06 www.adc.com • +1-952-938-8080 • 1-800-366-3891 39 Power-over-Ethernet Solutions Midspan Power-over-Ethernet Controller........................... 40 102094AE TrueNet® Structured Cabling Power-over-Ethernet Solutions Power-over-Ethernet Solutions TrueNet® Structured Cabling 102094AE • ADC’s new Midspan Power-over-Ethernet (PoE) Controller provides a flexible way to power IP telephony and other applications over a local area network. The IEEE 802.3af-compliant power source ensures reliability of service for Ethernet devices such as VoIP telephones, wireless access points, security cameras, etc. ADC’s midspan PoE controller also eliminates the need for installation of local power at the device, saving time and money. ADC’s patent-pending design also offers a modular SNMP slot and dual power supply slots that allow for easy future upgrades. For example, a non-SNMP enabled chassis can easily be upgraded by inserting the SNMP card at a later date, deferring up-front costs. Additionally, a single power supply chassis can be upgraded to dual redundancy at a future date should the circuits become critical. These upgrades can be performed without ever interrupting the data or power. Features • Dual compatibility with IEEE 802.3af and earlier devices • Detects device presence and transmits appropriate power, achieving dual compliance to IEEE 802.af and Cisco's legacy in-line powering standards • Delivers up to 15.4 watts of power on all ports; redundant power available • Modular SNMP and power supplies • Up to five panels can be daisy-chained and controlled via one CPU card and a single IP address Application and Benefits • Utilizes existing infrastructure - Same cables and RJ45 connectors • Offers less expensive, faster, simpler way to set up remote network devices - Wi-Fi access points - IP security cameras - VoIP phones • Provides easier remote access and management - Monitor the entire network and operation of individual devices - Remotely turn off or reboot network devices • Ensures greater safety - 48V, 15.4W, 400mA - 1500Vrms port isolation 3/06 Power-over-Ethernet Solutions Midspan Power-over-Ethernet Controller www.adc.com • +1-952-938-8080 • 1-800-366-3891 40 Power-over-Ethernet Solutions Midspan Power-over-Ethernet Controller Workstation PoE Power Not Needed Horizontal Cabling Power-over-Ethernet Solutions To Work Area (WA) without PoE Horizontal Cross-Connect (HC) To PD in Work Area (WA) Requiring PoE Power-over-Ethernet Midspan Controller IP desk phone Powered Device (PD) Power Required Work Area (WA) Ethernet Distribution Frame In Telecommunications Room (TR) 3/06 • 102094AE TrueNet® Structured Cabling Applications www.adc.com • +1-952-938-8080 • 1-800-366-3891 41 Power-over-Ethernet Solutions Midspan Power-over-Ethernet Controller Ordering Information Description Catalog Number TrueNet® Structured Cabling PWR-24ACS 16-port midspan controller PWR-16ACS 8-port midspan controller PWR-08ACS 24-port midspan controller, with N+1 redundant power PWR-24AC2S 16-port midspan controller, with N+1 redundant power PWR-16AC2S 8-port midspan controller, with N+1 redundant power PWR-08AC2S Accessories SNMP module (Mounts in all chassis) PWR-M Redundant power supply (Mounts in all chassis) PWR-PS Note: All chassis accept the ADC modular SNMP module and redundant power supplies Specifications MECHANICAL Ethernet Interface: Ethernet plus Power Interface: Dimensions: Weight (single power supply): Weight (dual power supply): Rack Mounting: 24, 16, or 8 RJ45s 24, 16, or 8 RJ45s 1.75" x 17.3" x 15.97" (44.4mm x 436mm x 300mm) 13.34lbs. (6.05Kg) 16.75lbs. (7.60Kg) 19" or 23", EIA or WECO ELECTRICAL Power Input Voltage: Power Input Frequency: Power-over-Ethernet: Powering Pins: Total Available Power: LED Indicators: Ethernet Input/Output: Channel Performance: 100 to 250VAC 50 to 60Hz IEEE 802.3af: 15.4 Watts maximum output on all ports +48VDC Output on Pins 4,5 and 7,8 400 Watts RJ45 Ports—Green = Power and Ethernet, Yellow = 802.3af device detected, but not powered Power LED—Green = Power OK, Red = Fan Failure or Overtemp 10/100Base-T (Active signal pins 1,2 and 3,6) Category 5e and 6 ENVIRONMENTAL AND SAFETY Safety Compliance: Emissions: Operating Temperature: Storage Temperature: UL, cUL, CE, EN 60950 FCC Class A, EN 55022 (CISPR22) 0 to 40°C (32° to 104°F) -20°C to 70°C (-4° to 158°F) • 102094AE 24-port midspan controller 3/06 Power-over-Ethernet Solutions Dual Compliance (802.3af and Legacy Cisco) www.adc.com • +1-952-938-8080 • 1-800-366-3891 42 Power-over-Ethernet Solutions As with ADC’s rack mount midspan PoE solutions, the four-port unit features dual compliance to both IEEE 802.3af and the pre-standard Cisco in-line powering allowing this device to power a wide range of solutions from all major manufacturers. Additional features include redundant power capabilities permitting two separate power supplies to be routed into the devices ensuring reliable operation. The rugged extruded aluminum design will withstand even the harshest environments without damaging the internal electronics providing years of reliable service unlike most plastic designs. Features • • • • • • Dual compliance to 802.3af and pre-standard in-line powering Redundant power supply capability Ability to deliver full 15.4 watts of power on all port simultaneously Optional wall mount bracket Compact, rugged, yet elegant design Aluminum extruded design for uncompromised reliability while still remaining lightweight Application and Benefits • Four-port design is optimal for small device count situations such as Wi-Fi deployments, SoHo, etc. • Eliminates installation issues with IEEE 802.3af compliant powered devices and all pre-standard in-line powered solutions • Easy to install, upgrade, and maintain • Allow utilization of existing network, including Ethernet switch and cabling • Years of reliable service and with minimal up-front cost • Maintenance-free operation 3/06 Specifications and ordering information follow on the next page www.adc.com • +1-952-938-8080 • 1-800-366-3891 43 Power-over-Ethernet Solutions ADC extends its leadership in midspan Power-over-Ethernet technology with the introduction of the new four-port unit. This device is optimal for low density Power-over-Ethernet installations, such as 802.11x wireless access points. The ADC midspan PoE device delivers compliant power to up to four devices, eliminating the need to upgrade existing Ethernet switches or provide unreliable local AC power to each device separately. The compact design can be mounted to a shelf or wall with an optional wall mount bracket. • 102094AE TrueNet® Structured Cabling Four-Port Midspan Power-over-Ethernet Unit Power-over-Ethernet Solutions Four-Port Midspan Power-over-Ethernet Unit TrueNet® Structured Cabling Weight: Mounting: 4 x RJ45 4 x RJ45s D-Sub 9 39.37mm x 107.95mm x 203.20mm (1.55"x 4.25"x 8.00") 1.5lbs. Shelf or wall (with bracket) ELECTRICAL Power Input Voltage (Power Supply): Power Input Voltage (Set-top Unit): Power Input Frequency (Power Supply): Power over Ethernet: Powering Pins: Total Available Power: LED Indicators: RJ45 Port LED: Power On/Off LED: Ethernet Input/Output: Channel Performance: Green—Powered Dark—Non-powered device Yellow—Device detected, not powered Flashing Yellow—Port Disabled Green—Unit Powered Dark—Not Powered Red—Internal Malfunction 10/100Base-T (Pins 1,2 and 3,6) Category 5e and 6 (data pairs) ENVIRONMENTAL AND SAFETY Safety Compliance: Emissions: Operating Temperature: Storage Temperature: UL, cUL, CE, EN 60950, C-Tick FCC Class A, EN 55022 (CISPR22) 0 to 40°C (32° to 104°F) -20°C to 70°C (-4° to 158°F) 100 to 240VAC +48 VDC, 1.5 A maximum (dual inputs) 50–60Hz IEEE 802.3af and Cisco in-line +48 VDC output, Pins 4,5 and 7,8 72 Watts Ordering Information Description Catalog Number 4-port midspan Power-over-Ethernet set-top unit PWR-04DT Redundant/replacement power supply PWR-04DTPS Wall mount bracket kit ADCSTBK01A Rack mount kit (holds three units) PWR-04DTRM • 102094AE MECHANICAL Ethernet Interface, 10/100Base-T Input: Ethernet Interface, 10/100 Data + Power Output: RS232 Craft Port Interface: Dimensions (Height x Width x Depth): 3/06 Power-over-Ethernet Solutions Specifications www.adc.com • +1-952-938-8080 • 1-800-366-3891 44
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.